low cost diffus ed junction low leakage low forward voltage drop high current capability case: jedec do-27,molded plastic terminals: axial lead ,solderable per mil- std-202,method 208 polarity: color band denotes cathode weight: 0.041 ounces,1.15 grams mounting position: any ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,50 hz,resistive or inductive load. for capacitive load,derate by 20%. byv28 -50 byv28 -150 byv28 -200 byv28 -300 byv28 -400 byv28 -600 units maximum recurrent peak reverse voltage v rrm 50 150 200 300 400 600 v max imum rms v oltage v rms 35 105 140 210 280 420 v max imum dc bloc king v oltage v dc 50 150 200 300 400 600 v maximum average forw ard rectified current 9.5mm lead length, @t a =75 peak forw ard surge current 10ms single half-sine-w ave superimposed on rated load @t j =125 maximum instantaneous forw ard voltage @ i f =i f ( av ) v f 1.25 v maximum reverse current @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja /w operating junction temperature range t j storage temperature range t stg 5.0 1.05 1.02 100 3.5 3.0 voltage range: 50 --- 600 v current: 3.5, 3.0 a 3. thermal resistance f rom junction to ambient. a 90.0 i r i fsm note: 1. measured with i f =0.5a, i r =1a, i rr =0.25a. 100.0 a - 55 ----- + 150 2. measured at 1.0mhz and applied rev erse v oltage of 4.1v dc. do - 27 a easily cleaned with alcohol,isopropanol and s im ilar s olvents 70 100 maximum ratings and electrical characteristics byv28 -100 - 55 ----- + 150 i f(av) 25 50 75 100 dimensions in millimeters byv28-50--byv28-600 s uper fast rectifiers features m echani cal d ata http://www.luguang.cn mail:lge@luguang.cn
amperes amperes ambient temperature, average forward current instantaneous forward current fi g. 5-- peak forword surge current reverse voltage, volts peakforwordsurgecurrent junction capacitance, pf amperes number of cycles at 60h z fi g. 1 -- test ci rcui t di agram and reverse recovery ti me characteri sti c instantaneous forward voltage, volts fi g. 4 -- typi cal juncti on capaci tance set time base for 10 ns/cm notes:1.rise time = 7ns max.input impedance =1m . 22pf. jjjj 2.rise time =10ns max.so urce impedance=50 . fi g. 2 -- typi cal forward characteri sti c fi g. 3 -- forward derati ng curve pulse generator (note2) d.u.t. 1 nonin- ductive 50 n 1. 10 n1. oscilloscope (note 1) (+) 25vdc (approx) (-) -1.0a -0.25a 0 +0.5a t rr 1cm 0.6 0.1 0.2 0.8 1.0 0.4 1.0 2.0 4.0 40 20 100 10 1.2 1.4 1.6 1.8 2.0 byv28-50 - byv28-200 t j =25 pulse width=300 s byv28-600 byv28-300 - BYV28-400 t j =25 f=1.0mhz 10 20 40 100 200 400 1000 0.1 0.2 0.4 1 2 4 10 40 100 20 1.0 2.0 0 single phase half wave 60h z resistive or inductive load 0.375"(9.5mm)lead length 250 3.0 4.0 3.5 1.5 2.5 50 100 150 200 byv28-600 byv28-50 - BYV28-400 8.3ms single half sine-w ave 12 5 10 2 0 50 100 50 60 70 80 90 40 100 byv28-50--byv28-600 s uper fast rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|